Mdd Respirator protection mask

protection mask

The mdd Respiratory Protection Mask is developed for medical areas of application; it offers reliable protection against airborne infectious agents and mutagenic substances, as well as aerosols and non-volatile, liquid particles.

The large-area, high-performance filter of the medical mdd Respiratory Protection Mask protects both wearers and their surroundings alike. It ensures the highest level of safety for medical specialists and patients in the operating theatre and under hygienic conditions.

Classification

Medical device class I acc. to EU directive MDD 93/42 EEC.
EN 14683:2019

Standards

The respiratory protection mask meets the requirements for protection class Type IIR surgical masks according to
EN 14683:2019.

Additional standards:

EN 1041:2000/A1:2013
EN ISO 10993-1:2009
EN ISO 10993-5:2009
EN ISO 10993-10:2010
ISO 15223-1:2017

Size

16 x 10 cm, folded

Use

The MDD respiratory protection mask

protects against airborne infectious agents, as well as aerosols and nonvolatile liquid particles up to 30 times the application limits.

National regulations must be observed.

Wear time

Dispose of after single use.

Storage

In the original packaging, cool and dry, out of direct sunlight.

Disposal

Safe thermal recovery or disposal in landfill. In the event of contamination, applicable laws and national regulations must be observed.

respiratory mask

Features

  • Extra large filter area
  • Breathing resistance
  • Optimal wear comfort through expansion fold design
  • Elasticated straps
  • Inner, flexible nose bridge with foam
  • Extended wear time
  • Space-saving storage
  • Secure fit through the elastic band
  • Individually hygienically packaged in a bag

Product code: PM-NV-W
Product description: without valve
The half mask meets the requirements of
DIN EN 14683:2019 for medical face masks / Classification Class Type IIR

respirator mask
delivery mask
respiratory mask

Accessory for more confortable wearing

protection mask
protection mask
surgical protection mask

 

Requirements of the standard
EN 14683:2019
TYPE IIR
Bacterial filtration efficiency (BFE)
meets the following requirements
≥ 98 %
Spray resistance meets
the following requirements
≥ 16.0 kPA (B 120 mmHg)
Antimicrobial cleaning meets
the following requirements

≤ 30 CFU/g
CFU = colony-forming units

 

Material
Inner & external layers Non-woven polypropylene
Protective layer Non-woven polyester
Filter material

Polypropylene

Nose bridge

Iron wire covered with
polyethylene, detectable

Nose cushion

Polyethylene foam

Straps

Latex-free synthetic rubber